For New Customer
Customer Service
Shafting --
Tel. No. 1- 585 - 924 - 1630
Mail Address
Fax no. 1 - 585 - 924 - 2421
Monday - Friday
8:00 AM. - 5:00 PM. (E.S.T.)
Home /
O
Turomat Company
P.O. Box 214
Wakrusa, In. 46573
R
Shafting (slides)
Standard Square Shafts are case hardened steel, precision ground to exacting tolerances up to 60" in length. Any Shaft can be modified to your specifications. Shafting can also be provided in stainless steel. Sizes available are 5/8", 1", 1 ½", 2", and 2 ½".
Careful selection of materials, proper heat treatment and precision ground to provide a smooth hardened surface for free recirculation of ball bearings along with 100% inspection and testing, to insure the high quality that is associated with the name TURNOMAT.
Copyright Turnomat 2000 - 2011 (all rights reserved)
For Series
BUS & BUR
SHG 625
SHG 1000
SHG 1500
SHG 2000
SHG 2500
Square
A
.605 x .605
.980 x .980
1.480 x 1.480
1.980 x 1.980
2.480 x 2.480
Length " L"
Std. thru Max. by 1/2"
Min. Hardness
Min.Depth
Surf. Finish
Micro-Inch
Straightness
Per Foot
Squareness
Per Inch
5.44 / 36" by 1/2"
6.68 / 48" by 1/2"
10.16 / 60" by 1/2"
11.68 / 60" by 1/2"
12.75 / 60" by 1/2"
R/C 58-63 x .060 DP.
R/C 58-63 x .060 DP.
R/C 58-63 x .060 DP.
R/C 58-63 x .100 DP.
R/C 58-63 x .100 DP.
16 - 32
16 - 32
16 - 32
16 - 32
16 - 32
.001 / .002
.0001 / .0003
.001 / .002
.001 / .002
.001 / .002
.001 / .002
.0001 / .0003
.0001 / .0003
.0001 / .0003
.0001 / .0003
BUR
BUS
SHG
Image shown is for illustrative purposes only
Options: Tapped hole in the end or on a shaft face ( one end or both ends ) or other as per your sketch.
Standard shaft configuration, shaft comes plain ( no holes )
Shafting /
O
c
