For New Customer
Customer Service
Shafting --
Tel. No. 1- 585 - 924 - 1630
Mail Address
Fax no. 1 - 585 - 924 - 2421
Monday - Friday
8:00 AM. - 5:00 PM. (E.S.T.)
Home /
O
Turomat Company
P.O. Box 214
Wakrusa, In. 46573
R
Wear Plates
Wear Plates /
In place of ball bearing gibs, wear plates made of self lubracating Bronze or turcite,*
have the same overall dimensions as their corresponding Ball Bearing counterpart.
Bronze:
Ampco 18
The primary Ampco alloy for heavy duty applications involving wear, abrasion and fatigue, where the absence of nickel in its composition significantly reduces the risk of mechanical abrasion with mating steel surfaces.
This is the material of choice for wear plates, bearings, tie bar nuts, gears, worm- wheels, tube bending tools,wiper dies and similar applications.
Ampco 18 is readily machined and should be used in critical situations
where it is essential to avoid unnecessary down-time or damage to moving
steel parts.
The mechanical properties of Ampco 18 can be enhanced by special heat-treatments devised by Ampco Metal to meet specific customer demands for higher impact resistance or resistance to distortion, especially applicable to the aviation and steel production sectors.
Turcite: *
Turcite® is a proprietary material from Trelleborg Sealing Solutions
Low Friction. A unique property is the very low static coefficient of friction of Turcite®, which results in extremely low breakout friction. Turcite® materials do not adhere to their mating surfaces, eliminating any worries about stick-slip in dynamic applications.
Typical applications for this material would include bearings with maximum continuous service temperature of 180°F. Some examples are: chip handling equipment, printers, conveyors, bicycles, packaging equipment and food processing equipment. Turcite® A is excellent when wear resistance is a priority.
Turcite bearings have been specified to run in corrosive environments such as formaldehyde, natural gas, turpentine and amyl alcohol.
Key Properties
Very low friction for reduced power loss
No stick-slip for positional accuracy / control
Good specific bearing loads
Low wear for long life
Excellent chemical resistance / fluid compatibility
Unlimited shelf life
Absorbs vibration during machining
Typical Applications
Cams and cam followers
Bearings
Rollers
Valve seats
Insulators
Liners
Copyright Turnomat 2000 - 2011 (all rights reserved)
O
c